Dissolved Ozone Monitor & Controller

With sound knowledge of the varied aspects of market, we are offering our clients a wide array of Dissolved Ozone Monitor & Controller. These monitor and controllers are used for on-line monitoring and control of ozonation systems. Our offered controllers are demanded in pharmaceutical industries as it is ideally suited to water bottling systems or municipal water treatment. We fabricate these plants using sophisticated technology, which are obtained from well known and leading vendors of the industry. Our products are featured with excellent quality, corrosion resistance and low power consumption.

Dissolved Ozone Monitor & Controller

REQUEST CALLBACK

Ask for Price

Product Price :Get Latest Price

Driven with perfection, we have been able to provide our customers with a exclusive range of Dissolved Ozone Monitor and Controller. Ozonation systems are controlled and monitored through these controllers. These products are manufactured utilizing high grade technology and raw material with the help of sophisticated machinery.

Design specifications:

Make OZ-AIR®
Operating principle: ORP based
Range: 0.05 ppm – 10 ppm
Display: 3½ LCD display
LCD size: 12 mm height
Set points: Two with delayed timer for high / low
Set point adjustment: Settable throughput the range
Power supply: 220 v, Single supply
Recorder output: 0 – 1 Volts or 4 – 20 ma

Sensor Specifications:

Make: Broadly James, USA
Model: SC 12102 (BMC)
Diameter: 12 mm
Range: 0 – 2000 mv
Temperature: 0 – 150 °c
Pressure: 100 PSIG

Mounting Specifications:

Body: SS – 316
Diameter: 25 mm
Connection: ¾ NPT Male

Yes! I am interested

HACH Dissolved Ozone Monitor and Controller

REQUEST CALLBACK

Ask for Price

Product Price :Get Latest Price

We are offering an exclusive range of HACH Dissolved Ozone Monitor and Controller. These are designed & fabricated using high quality material by latest technology. Our offered product range is highly appreciated by our clients for its wide use & features.

Design Specifications:

Make: HACH, USA
Cat No: 60433 – 00

Highlights include:

Great for readings in low conductivity water with no interferences from oxidants or pH
Reagent less analysis of ozone - ion-selective membrane separates electrolyte from sample water
Plug & play with digital controllers simplifies setup
Built-in flow regulation reduces need for additional accessories
Integral temperature sensor provides more accurate readings

Features:

Few Interferences form Oxidants or pH over a Wide Measurement Range - Bromine, chlorines, chlorine, chlorine dioxide, hydrogen peroxide, and pH do not interfere with ozone measurements using the HACH 9185sc Anthropometric Ozone Sensor which can measure from 0 to 2 mg/L ozone
Ideal for Low-Conductivity Samples - The 9185 sc ozone system has a low minimum detection limit of 0.005 mg/L ozone. Because the Anthropometric cell is separated from the sample by the membrane and is immersed into an electrolytic medium, the 9185 sc ozone sensor is suitable for use in water with low conductivity
Reliable Anthropometric Measurements - The sensor used the 9185 sc system is a two-electrode Anthropometric sensor (gold cathode and silver anode) with a membrane selective to ozone. Membranes are pre-mounted on retaining caps to simplify and reduce maintenance time
Flexible Options - Options available for the 9185 sc ozone system include

Specifications:

Measurement Range: 0 to 5 ppm (mg/L) Ozone (O3)
Accuracy: 3% or ±10 ppb O3, whichever is greater
Standard Deviation: 1.0%
Response Time: 90% in less than 90 seconds
Measurement Interval: Continuous
Minimum Flow Rate: 14 L/hr (200 to 250 mL/min 14 L/hr (200 to 250 mL/min)
Auto Regulated: By flow thru cell
Pressure Range: 0.1 to 2 bar in flow cell
Storage Temperature: 20 to 60°C
Operating Temperature: 0 to 45°C
Operating Humidity: 0 to 90% non-condensing
Sample Temperature: 2 to 45°C
Temperature Compensation: Automatic over sample temperature range
Power Consumption: 12 V, 1.5 watts
Measurement Technology: Amperometric/Membrane (electrode, membrane, electrolyte)
Interferences: No interference from bromine, chloramines, chlorine, chlorine dioxide, or hydrogen peroxide
Zero Calibration Electrically or with ozone-free water
Calibration Comparison of lab process sample
Calibration Interval: 2 months
Maintenance Interval: Measurement Cell: 6 months for membrane and electrolyte, typical
Mounting Flat, vertical surface (panel, stand, etc.)
Connections Sample Line: 1/4-in. O.D.
Drain Line: 1/2-in. I.D. (supplied)
Materials Electrode: gold cathode/silver anode
Measuring cell: acrylic
Probe body: PVC
Environmental Ratings IP-66/NEMA 4X
Certifications UL, CSA (certified by ETL), CE
Dimensions 270 x 250 mm (10.63 x 9.84 in.)
Shipping Weight 6.5 kg (14.3 lbs.)